Price: $602.74
(as of Dec 02, 2024 03:37:07 UTC - Details)

This Rinnai high-efficiency non-condensing tankless water heater is the ultimate solution for energy-conscious homeowners seeking a smart, compact, and efficient water heating system. This tankless water heater offers advanced features and a durable design that provides an endless supply of hot water, making it perfect for households of all sizes. Enjoy unlimited hot water flow throughout your home, as well as a compact and space-saving design that conserves energy by heating water only when necessary, providing optimal energy efficiency. With a high-performance 5.3 GPM hot water flow rate, this tankless gas water heater delivers powerful and constant water pressure for a satisfying and uninterrupted stream. Say goodbye to low water pressure and enjoy a powerful hot water experience. Rest assured with our tankless water heater, backed by a guaranteed warranty. Enjoy a 10-year residential warranty for the heat exchanger, 5-year warranty for labor, and 1-year warranty for parts. For added convenience, Wi-Fi monitoring is available with the Controlr module (not included), allowing you to monitor and control your water heater from anywhere. Rinnai's non-condensing tankless water heater models offer advanced technology in water heating. Unlike traditional tank heaters that accumulate rusty sediments, our compact water heater elements have a longer lifespan as water runs continuously through the pipes.
Endless Hot Water: Our tankless hot water heaters let you enjoy unlimited hot water flow throughout the house with a compact and durable design that fits your home and lifestyle
Energy and Space Efficient Tankless Gas Water Heater: This small hot water heater conserves energy, only heating when necessary; Enhanced scale detection lessens possibility of serious, long-term damage to unit
Optimal Water Pressure: This tankless water heater offers a high-performance hot water flow rate up to 5.3 GPM for a powerful, constant stream that serves up to 4 appliances at once
Professional Installation Recommended: Visit the Find a Rinnai PRO page on our website to locate a qualified technician in your area to install your tankless water heater; We do not recommend installing a water heater without a technician
Guaranteed to Last: 10-, 5-, and 1-year residential factory warranty for heat exchanger, labor, and parts, respectively
Reviewer: Jerry
Rating: 5.0 out of 5 stars
Title: Error code 11 easy fix! GREAT WATER HEATER!
Review: Great water heater, easy install if you have plumbing and electrical knowledge. NOT plug n play nor does it have a plug in power cord. Must be wired to a switch.After install I got an error code 11 which is a problem with the propane. After some research I found that my regulator on my propane tank was 20 psi. Fortunately my regulator had a dial to adjust pressure down between 8 w.c and 13 w.c. and it fired up and works great. I'm replacing my adjustable regulator with a 2 stage 11 w.c regulator to avoid any future proplems. Hope this helps 🙂

Reviewer: Netizen
Rating: 5.0 out of 5 stars
Title: Very good unit. Tricky install. Need special vent pipes, not your old ones.
Review: The piping that, in my case went up through the crawl space, then through the roof was tricky to install. Ordered all new pipe after measuring carefully and cataloging the fittings I'd need (45's, 90's, and so on). Make sure to order the right diameter double-walled pipe. Look online. I ordered online and the company actually shipped the same day, and it came the next, which is nice if, like me, you are without hot water in the interim.S. Brewer's review is excellent. He covers all the crucial points very well. He explains clearly what you will be faced with if you decide to DIY the job. It was challenging. When you get to the point of lifting the unit up to hang it on the wall while simultaneously marrying it to the vent pipe, a second set of hands would be a major plus. I did it myself, but a second set of hands would be real boon at that point.I was able to use the existing hole in the roof, but, as it turned out, the contractor who built the house preferred to cut a gigundo hole in the roof instead of doing the geometry to accurately predict the penetration location and hole size. To compensate, I created a plywood insert with a proper hole cut into it, pre-drilled the screw holes, and then used light cord to pull the "mask" up from above, up on the roof. Once I had it placed properly, I used a right-angle drill to drive in the screws from underneath.Don't forget that you'll need a flashing unit on the roof to make a good waterproof seal, and also some roofing tar to further seal it. Be careful when lifting the shingles to slip the flashing unit under them to avoid breaking them. If you do some minor damage to the surrounding shingles, use the roofing tar to compensate.Once installed, the unit works very nicely with the caveat that it does not seem possible to set the temperature above 120°F. That's really sufficient, but my old unit was set at 125°F. Not a deal breaker.If you've not had an on-demand heater before, be aware that when running hot water, there's a lag before you actually get hot water. With this unit about 20' from the kitchen sink, that's about 30-45 seconds before the water warms up.Overall, very happy to have hot water again, and this unit outperforms the previous, larger capacity unit it replaced.Install a phosphor filter upstream from the unit to reduce maintenance flushing. Do install the valve set that will later permit de-scaling the boiler tank. This is important for the longevity of the installation.TIP: use the woven steel, flexible pipes to connect the unit to gas, inlet, and outlet pipes. These are much easier to work with than their copper counterparts, which are hard to bend-- MUCH easier.Good luck. If you prepare well ahead of actually doing the job, you will greatly reduce the stress factor in carrying out the actual installation. Do your homework. YouTube is your friend.... and DO read S. Brewer's excellently written and potentially very helpful exposition on the entire process of installing these units.p.s. If you need hot water in a hurry at your taps, you'll want to spend the extra spondoolix for the unit with a recirculating pump: it's a luxury, but if you prefer faster delivery of hot water to your taps, you'll want that version of the heater.Cheers, N.

Reviewer: Amber VanMatre
Rating: 5.0 out of 5 stars
Title: Great tankless heater!
Review: We have a two bathroom small family home w four of us. It works great!! We can run multiple sources of water at the same time and it hardly changes the temperature. Very impressed. It’s been 6 months and it still works great. Great water heater for the price. Definitely recommend. Also love having tankless because I live for long showers and hot baths. And I never have to worry about running out of hot water or leaving hot water for the next person. Which is great when everyone is getting ready at the same time in the mornings.

Reviewer: L
Rating: 5.0 out of 5 stars
Title: Amazing Product
Review: I've waited nearly 2 months before I wrote a review. Here's my summary:1. The installation is easy if you are replacing an existing unit, I replaced dual tank water heaters and relocated the tankless heater closer to the majority of the water users in the house so the installation was more time consuming and difficult. The instruction manual is awesome, take the time and read thru it (prior to buying) and follow it strictly. I bought a gas fired unit, had the gas company come out and validate the inlet pressure and ran all the calculations recommended. Installation took 4 days since I had to run additional gas piping, extend hot and cold water lines and install the vent piping to the exterior.2. After you've read the manual, plan your installation carefully (vent, water in, water out, gas piping in, power). These all converge around the unit which isn't large and will take planning to make it fit and functional. Purchase all the vent pipe ($$$), water piping, gas piping, and valves for the unit (the bundle of all of these are not inexpensive)3. The unit fired up after the second try (it had to vent the air out of the gas line on the first attempt). The start up was very easy.4. My wife likes HOT water, the unit is delivered with a maximum of 120 degree output. I queried the internet and found the program button sequence to get it to 140 degrees. It worked instantly, but after an hour the unit reset back to 120 degrees and the process wouldn't let me place it back to 140 degrees. I called the service desk and gave my number for a call back. 30 minutes later, the call came in. The service tech asked a few questions so she knew which unit I had purchased and then I communicated to her what I had experienced. She told me that the code I had used was for a different unit and she directed me step by step how to program the unit. (I had the panel open and performed as she told me each step). It took 30 seconds and the unit has worked correctly ever since.5. The closer the unit is to the usage point the faster the water heats up, so don't have expectations that you'll get instantaneous hot water when there is 20+ feet of cold water in the pipe that has to be pushed out by the hot water, but it does heat the water extremely fast and it's on the way as soon as you open the hot water faucet!

Reviewer: David Allan
Rating: 5.0 out of 5 stars
Title:
Review: We have this at our campgrounds in our 45’x14’ Northlander. Works great and easy on the LP. Was easy to setup and easy to winterized.

Reviewer: Marco Antonio Ramirez Zuno
Rating: 5.0 out of 5 stars
Title:
Review: Excelente producto, caliento rápidamente y sin complicaciones. Ampliamente recomendado.

Reviewer: Treena Sinclair
Rating: 5.0 out of 5 stars
Title:
Review: we bought this tankless hot water heater to replace the eccotemp we bought the heat exchanger leaked after a year this tank is so much better the pilefiter had it up and running in three hours from the box I love it so much I am buying another one for our RV great value

Reviewer: Zackems
Rating: 5.0 out of 5 stars
Title:
Review: Been using this for 4 months now, couldn't be happier with it.Was told by a plumber to make sure you get the bypass valves so you can descale it every 6 months or so.

Reviewer: glenn
Rating: 5.0 out of 5 stars
Title:
Review: GOT A GOOD DEAL...$280 CND SO UNLESS ITS BROKE I GOT A GREAT DEAL..HAVNT USED IT YET BUT TOOK IT OUT OF THE MANUFACTURERS BOX AND GAVE IT A GOOD VISUAL INSPECTION..NOTHING WRONG I CAN SEE..PACKED REALLY GOOD