2024 the best smoker grill combo review
Price: $311
(as of Nov 05, 2024 15:10:09 UTC - Details)
Warranty & Support
Feedback
Unlock flavor in every tender bite with Masterbuilt’s 40-inch ThermoTemp™ Propane Smoker. This vertical propane smoker makes creating deliciously-smoked foods simple and easy. Load your propane fuel into the hose, set your desired smoking temperature on the dial, and press the ignition button to light your flame. With Masterbuilt’s ThermoTemp technology, ensure your smoking temperature is maintained evenly throughout your cook leaving you with smoked meats that are rich in flavor and tender in texture. With four chrome-coated smoking racks and 960 square inches of ample cooking space, cook for the family with ease. From holiday hams to summertime smoked salmon, unlock flavor in every season with Masterbuilt’s 40-inch ThermoTemp Smoker.
Vertical propane smoker with 960 square inches of cooking space
Ignition button to easily light fuel with the push of a button
Adjustable temperature dial to set your desired smoking temperature up to 375°F
Four chrome-coated smoking racks
Spacious vertical design that fits up to 16 chickens, 6 turkeys, 8 pork butts or 8 racks of ribs
Removable water bowl to add moisture and catch food drippings
Woodchip tray to add delicious smoky-flavor to food
Adjustable air damper for smoke control
Lockable door latch to retain heat and smoke inside the fully insulated smoker body
Convenient window in the smoker to monitor food during smoking process
Reviewer: lcar987
Rating: 5.0 out of 5 stars
Title: It's Worth It!
Review: Unpacking this smoker was interesting. A lot of thought went into getting all these parts into that one box! Even with all the carefully laid out packing and all the Styrofoam, some parts still got damaged, including some denting on the side. I was able to straighten most of it well enough so just some minor cosmetic damage shows.Assembly: Follow the directions!I rated this 3 stars because it some of the assembly is a real pia! Not a deal breaker - you are getting a LOT of smoker for the money! Take your time. Plan on spending a few hours putting this smoker together. I began by sorting all the hardware and there is a lot of it. I do a lot of mechanical work so every group of nuts, bolts, screws got its own magnetic tray and label. This helps a lot. No trays? Use cereal bowls or something. I installed all sheet metal type screws BY HAND (as in no screw gun, even though I own several), to avoid stripping them out. Even so, I chose to up-size the short ones (maybe #8 x 1/2") to a #10 size. Most parts lined up fairly well.In the short time I have had this smoker I've done ribs and one pork roast. All came out excellent. If you are new to smoking, seek guidance via the Internet, friends or a good book as this smoker comes with nothing. I was surprised by this, expecting to find at least a basic getting started type booklet. The Masterbuilt website has some good info.CLEAN THE WINDOW!! EVERY TIME!!I am NOT a fan of the window and one reason I held off buying this smoker when it first came out was I was hoping for a model without the window. It isn't needed. In fact, visibility drops when the smoke gets going and continues to degrade. After 3-4 hours you can't see much at all. Smokers don't need windows!I would absolutely buy this smoker again. It is priced well, probably because the customer does all the assembly work! It also works quite well. I have not needed to contact Masterbuilt for anything so far but I hear good things about them. Buy it - you will like it!
Reviewer: Anomalous Phenomenon
Rating: 5.0 out of 5 stars
Title: A Great First Smoker â Happy BUT READ CAREFULLY - Updated!
Review: Amazon robots call this model the MB20051316 with thermostat control â 40 inch, Black. The box is labeled somewhat more appropriately, âMasterbuilt 340G XL.â It doesnât matter what you call it, as long as it works. This was my very first smoker and my out of box experience has been excellent so far - but - because of some reviews, I almost didnât buy it.THE GOOD:Many reviewers complained about build quality, damaged or missing parts and trouble with the burner assembly lighting and staying lit. Even more complained about getting customer support from Masterbuilt. I didnât experience any of this. I didnât need to contact Masterbuilt, in part, because I did a lot of research before making this purchase.ASSEMBLY:Iâm not the most âhandyâ guy but, I found the instructions (and a Masterbuilt Youtube video) to be sufficient during the build. I wonât say it was easy but it wasnât bad. I took my time, and that methodical approach meant I had no issues during the assembly process. I probably spent 4 hours on the build. I was completely alone and had no trouble standing it upright once the bulk of the construction was complete.I built, bubble tested all gas connections and seasoned the unit all in one single day. Not a bad out-of-box experience! Usually, my wife has to come out of the house to remind me not to swear at least 45 times during a project like this - but for some reason, there was no swearing! My wife was more than a little suspicious. A few neighbors stopped by to ogle the debris field in my driveway from all the packaging and of course, they invited themselves over for brisket or pulled pork once they realized what I was building, indicating my next purchase may have to be a fence⦠with some razor wire on the top.MODIFICATIONS:I purchased Lavarock sealing tape to enhance the door seal and a separate dead-simple interior oven thermometer as a simple way to double check temperatures. Donât freak out over temperature variations. There have to be dozens of ways to monitor your smoker temp as well as your meat. Expecting this smoker to automate that effectively is unrealistic. It may be a âsmokerâ but YOU are the pit boss. Donât get mad at the machine if you get lazy with your cook.During our first smoke, (a whole chicken and an 8lb pork shoulder) our old iGrill meat thermometer proved to be about as useless as the day we bought it. It did provide feedback but it kept dropping the signal. We wished we had something âbetterâ for our next smoke (More on that in minute.)YES IT HOLDS TEMPS:During our first smoke, we saw temps rise and fall constantly. Because of this, I was out there fooling around with the controls constantly. All I managed to do, was keep things in constant turmoil. During our second smoke, I let the thermostat do its job. That worked much better.The thermostatic control built into this smoker works very well. You can set a temperature and verify that with any thermometer â once youâve achieved the desired range, it will keep and hold that range very well. Huge variations will occur when you open the main door and smaller variations may occur when you change chips or add water to the pan. Let the unit adjust itself to your desired range before you try adjust the burner.Water is the key to holding temps. Fill the pan ¾ full and check it every hour or so. The water helps regulate temps while providing moisture.Surprisingly, this does not use that much propane. The little gage isnât all that helpful but itâs better than nothing.THE BAD:Itâs not really bad. If youâre used to smoking with an offset grill, electric smoker or your regular old gas grill â there may be a learning curve. Every smoker has its quirks. Keep that in mind when you read other reviews.For me, the two worst things to complain about are: The hose for the propane tank isnât long enough to allow the tank to be mounted on the smoker during use. [Turns out I was wrong about this. There is enough hose to fit. ] Also, the metal edge on the inside the door where the glass is fitted needs to be filed down. Itâs got razor sharp burrs or jagged edges that will chew up your sponge, hand or cloth during cleaning. This in no way affects function so itâs minor. Iâll hit it up with a Dremel tool next cleaning. [ I did this very carefully and it helped a lot!]THE UGLY:Cleaning. Youâll need to be ready to do a lot of this. The idea of putting glass in the door seemed attractive to me. I hadnât had a smoker before. Five minutes in and Iâm partially blind to whatâs happening inside. 4 hours in and I might as well have no glass at all. Donât get me wrong â the glass is convenient but itâs mostly for luring in new smoker buyers. The pros know this is a gimmick. It still looks impressive, and I am in no way dissatisfied. Just plan to clean this thing more than you think.CONCLUSION:My second smoke is well underway and Iâm loving this unit. My neighbors are eyeballing me with hunger in their eyes. Iâm not sure how long I can keep them at bay with just a pitchfork. If youâve gotten this far â send reinforcements! Please!UPDATE & MODIFICATIONSAfter the 2nd smoke (11+ hours ) I have some observations. The temp control works within reason. I do not expect this to hold at any precise temperature. However, it held temps within 5-10 degrees throughout the day. It did adjust itself after opening doors but the temps would spike as high as 330 - 350 before returning to 275. This is normal.After another successful smoke, I cleaned the unit and noticed some small modifications can be made to extend the life of the smoker. Please note: I am not responsible for any modifications YOU MAKE based on these suggestions.1.) Trapped water was discovered in both the upper (main) and lower door after cleaning. To prevent this, I drilled a 5/16ths hole into the right-hand bottom (underside) of the lower door. (When the door is installed, and you are facing the unit. The hole will be located on the underside near the far-right corner.) This will release any trapped water after cleaning. This hole should allow water to escape without any sacrifice to functionality. I filed the edges of the hole(s) with a Dremel tool to help protect the powder coat.2.) I repeated these steps on the main door. When facing the smoker with the door closed, a 5/16ths hole in the right-hand bottom (underside) of the main door will allow any trapped water to escape after cleaning.3.) Water Tray Rack: After inspecting this rather difficult to remove tray, I could see the sides were slightly bowed outward. A quick tap in the middle of each outside bar (with a hammer) made the tray slide in and out of the smoker MUCH EASIER. Use caution when removing, filling, and replacing this tray, especially during use. About ¾ full should do it.4.) You may not need to do this - but my unit had a very rough inside edge around the glass in the door. I was able to use a Dremel tool to carefully file down all the burrs and edges so that all edges are now smooth â and no long snag a sponge or cloth.5.) After a thorough cleaning, I left the unit sitting in full sun with the doors open to allow the unit to dry completely. Because I installed Lavarock sealing tape around the doors, extra precautions were taken. This tape absorbs and holds some water. I wanted the tape to be completely dry before closing the doors and putting the smoker away in my garage.6. I prefer wood chunks to wood chips for long lasting smoke.
Reviewer: Jemal Williams
Rating: 1.0 out of 5 stars
Title: Donât purchase, quality control sucks.
Review: 1.) Out of the original box product had a piece of tape on door that said dent. I purchased this brand new and not used.2.) Fabrication was off. The holes inside of the cooking chamber to mount temp gauge were off which left parts of the cable exposed to heat.3.) The hinge for the bottom door was completely missing making it impossible to use the smoker.Do not purchase. Quality control is absolutely horrendous.
Reviewer: Scott D. Worne
Rating: 5.0 out of 5 stars
Title: This is my 4th propane smoker and the best out of all of them.
Review: I have been smoking meat for 35 yaers and have gone through many smoker. I have used them all from charcoal, pellet, wood fired and propane. I prefer propane in a home smoker since one can control the temperature more precisely than the other types. My last Masterbuilt smoker was way too big for a propane smoker so I gave it away to a family member when I moved to Texas. I believe it was the largest one that Masterbuilt makes. The single burner was not powerful enough for the large smoker so it never would hold a high temp. This one is perfect. This burner is perfect for the size. If assembled properly one does not need to add any type of sealer around the door. I have zero smoke leaking there. I also have no problem with the wood chips igniting at all. This is one great smoker! The wood tray works very well and does not need anything else like a cast iron pan. The only thing that I can say is not perfect is the heat dial. It is off by 25 degrees so always use an oven thermometer. On mine 250 is actually 225 degrees.
Reviewer: Ted G.
Rating: 1.0 out of 5 stars
Title:
Review: Defective upon setup, propane won't stay on unless nob pushed in continuously. Thermometer for propane shut off likely faulty. Company won't replace the part bad customer service
Reviewer: Rc
Rating: 4.0 out of 5 stars
Title:
Review: Si fueron unas 4 horas la armada , pero funciona bastante bien si hay que ponerle una cinta hermética a la puerta por qué deja salir mucho humo, y la madera en trozos grandes los chips los quema muy rápido,Lo único malo .En temperatura muy baja no quema muy bien la madera
Reviewer: Andres M.
Rating: 4.0 out of 5 stars
Title:
Review: Todo muy bien
Customers say
Customers like the smoke quality of the product. They mention it delivers a lot of smoke and is a pleasant experience. However, some customers differ on ease of assembly, temperature control, functionality, quality, value for money, build quality, and size.
AI-generated from the text of customer reviews