Price: $249.99
(as of Nov 19, 2024 03:21:17 UTC - Details)

From the brand

Check Out New Product!

Your Very First 3D Printer

PLA Filament 1.75mm

High Speed Filament

3D Printer Filament 1.75mm

Parts & Accessories

Resin 3D Printer

3D Printer Resin

ELEGOO develops the high quality, cutting-edge and user-friendly 3D printers, and provides the dedicated servce in the consumer 3D printing industry.

At ELEGOO, we go beyond being a 3D printer company. We recognize the crucial role businesses play in fostering a sustainable ecosystem. We believe in the power of innovation and sustainability to shape a better world.

OVERVIEW OF NEPTUNE 3 PRO: 225x225x280mm/8.85x8.85x11 inch printing size can meet the needs of most users. With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation
DUAL-GEAR DIRECT EXTRUDER: The new direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS
NOZZLE KIT FOR BETTER PRINTING: The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging
SMARTER PRINTING EXPERIENCE: Auto bed leveling adopts a high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axis height to compensate for any irregularities and unevenness of the printing platform(Only applicable to metal printing platforms). The printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage
MORE STABLE PRINTING: The Z-axis with dual synchronized lead screws and dual-motor drive for more stable movement of the print head and higher printing accuracy, avoiding the printing deviation driven by a single Z-axis lead screw motor. The 4-wheel V-guide rail pulley is made of POM with more stable movement, low noise, wear resistance, and longer service life
Reviewer: Michael B. Taylor
Rating: 5.0 out of 5 stars
Title: This is a great machine
Review: I’ve only had a short time. I have zero prior experience with 3D printing. Once received, I watched many many YouTube videos. Setting up the machine. Using the supplied modified for this machine, Cura software. I have download some EZ to print from Thingiverse. Learned I had to extract the files. Then move the object to print onto the Cura print platform. Sometimes rotate the object on the Cura platform. Slice it, save to a removable microSD card. Make sure to click the pencil icon at bottom left of Cura screen and name it what you want before saving to the microSD card. Then insert card into the printer. I use nozzle temp 220 and plate 70. I only print one object at a time, unless small and I can place very close to each other in the Cura platform before I slice and save to microSD card. The Amolen silk shiny PLA is very nice to print great definition and to remove from plate when finished printing. Let it cool before removing. The Elegoo PLA works, but just not as nice. I use the full auto level between different objects. I try to print 3 of same objects before I do a full re level. I’ve discovered to check nozzle distance to plate after each full leveling. I run a sheet of typing paper under nozzle and adjust so there is a good drag. I first did not adjust nozzle close enough. I learned. I adjusted my Cura for a wide brim for greater adhesion of piece as it prints.watch YouTube for this. I watch carefully first several minutes to be sure the filament is lying down good. If not , i stopped , cleared away the mess, and did full leveling and nozzle distance adjustment. I watched a lot of YouTube videos. Once I decided to spend time in leveling, nozzle distance and set my nozzle and bed temperature up, it’s been really great pieces printed. Watch many YouTube videos as you learn about each aspect. After one or two days commitment to basic learning and adjusting your routine, you will be very happy with this machine. Take the time and learn. This is a great machine and overall satisfying little hobby. UPDATE. I have been using for awhile. GREAT MACHINE. I have printed many different items. All came out great. Make sure your bed heat is high enough and bed is thoroughly heated. Watch the first several layers, get in there with a flashlight. If not laying down perfectly. Stop and clear it out and start over. I’ve only needed to do this twice. This machine is a pleasure to use. Great Great! UPDATE. I’ve been using almost daily, running all night, for a little over 2 months. STILL GREAT. I’ve used ThingIVerse and also bought STL files, from Etsy. Dinosaurs, Astronaut, Furby, Candy dispense using mason jar, squishy turtles, many variations of whistles, Recorder, Bird shaped multi tone whistles, many different key fobs, pull helicopters, lots more, many items. Nozzle 220 and bed 70. Keep nozzle height low, a sheet of typing paper has pretty good friction to pull out, but not too tight either.Now a situation. My nozzle got clogged. I YouTube it. Easiest is replace it. Two extra came with the machine. Extras look inexpensive. YouTube has a very simple method to replace with needle nose pliers and 6mm socket. EZ and quick. Runs perfect after I did that. I think I’ll change that every month, just to be sure I don’t have a clog during a print job. This machine is simple to use. You MUST perform the total automatic re leveling of the bed before each print job. I’ve been disappointed when I skipped this. Great Quiet Simple machine that produces perfect items easily!! You can spend more money, but if you want a simple to use , reliable machine, BUY THIS.

Reviewer: Professor Craig Donor
Rating: 5.0 out of 5 stars
Title: Awesome printer easy setup. Not for beginners
Review: This 3D printer went together fast. In the box is a USB stick with SD card with videos on assembly and software. Install the Elegoo Cura (thats the program you use to output files onto your SD card to print). Then watch the assembly video if needed, but directions were pretty clear with pictographs.After assembling I made a few quick test prints and they came out phenomenal with factory settings. To be honest, I had purchased an Ender 3 pro before I got this printer. I was semi- familiar with the process of 3D printing due to this. I've had NOTHING but bad luck with the Ender. Wasted TONS of filament and time. This printer hasn't had a failed print yet... im impressed!The process of outputting files to your card is called "slicing". Then that "slice" must be saved to the SD card as a .gcode file. Then you pop the SD card into the Elegoo and navigate to the gcode file and print it. The Elegoo Cura software is the program you can make changes to the model and fine tune the settings. Temperature, speed of print, support structures, thickness of the lines etc. are all done through the cura software. Its fairly intuitive and little info windows pop up to tell you about the area your hovering over...very helpful.There are a few draw backs to this machine but none would be a deal breaker.1. The print Head assembly is GIANT. This makes seeing smaller pieces being printed near impossible. The first few layers of a calibration cube for example are dwarfed by the enormous print head. Hard to check adhesion and print quality that way.2. The slot to insert the SD card is inset into the machine under the front of the build plate. It's hard to get the card inserted especially for an old fart like myself.3. You can NOT adjust the e-steps from the display pad. E-steps are the settings we use to "fine" tune the control motors. Y axis, X axis, and Z axis; Y being for and aft, X being right and left, Z being up and down. You can edjust the steps for filament dispensing but not the rest. In order to adjust and fine tune your printers e-steps you'd have to get software to output a programming gcode file. This means you'll need to learn a new software and programming style. It's not impossible but this isn't something you'll want to buy for gramma at Christmas as she will be lost. Hopefully in the future ELEGOO will update the firmware to include this ability.As for why it's important to adjust the e-steps... these control how far a motor is actually moving. Take a calibration cube for example. The dimensions of the finished cube are expected to be 20mm tall X 20mm high X 20mm wide. With an untuned e-step your cube may come out being 21mm X 19mm X 20.5 mm. This may not seem like a big deal, but in the grand scheme of things if we are printing items with threads or a certain diameter to fit into/onto something else we need them to print exact.Out of the box this printer was within a few tenths of a mm of being dead on. Make SURE to level your bed BEFORE you do anything. The bed must be at temperature and the nozzle at temperature as well. This is not in the instructions. If you set your level with them cold or room temp your plate to nozzle distance will decrease when you start a print. Things expand when you heat them and this will decrease the gap if you don't pre-heat.The second thing you need to do after leveling is measure and extrude some filament to set the e-step of the extruder. This will make sure your not pushing too much or too little filament out. Measure 120mm of filament from the top of the print head and make a mark there. Then after preheating the nozzle to the temp your filament needs to melt, command the printer to extrude 100mm of filament. Then measure the exact amount the filament traveled. Use that distance to calibrate your e-steps using this formula... yes you're going to get math on you.Your current e-steps programmed in the machine multiplied by 100 (thats the distance we wanted extruded). Take that number and divide it by the actual amount the filament traveled when you measured it. That number will be your new e-step setting.Once you've leveled the bed, and set your filament e-steps your ready to print. My first print was a threaded funnel for my new car. It threads in to where my oil cap is so I wanted to see how precise the prints were. See my pictures. Using default settings the print came out spectacular with nylon filament. True test was threading it into my car... it went right in with no issues.All in all this is an AWESOME printer. It BY FAR outperforms the Ender 3 pro. I've had the printer running non-stop for 4 days now and not a single issue with it. If your willing to tackle a bit of a learning curve with programming e-steps this could be an amazing printer. You will NOT be disappointed.

Reviewer: Pepe
Rating: 5.0 out of 5 stars
Title:
Review: Es una buena opción si empiezas a incursionar en el tema de impresiones 3D. Muy fácil de calibrar y operarla.

Reviewer: Francisco Torres
Rating: 5.0 out of 5 stars
Title:
Review: Estoy comenzando a aprender a usarlo, tiene la opción en configuración para elegir el filamento que vas a usar y por default maneja diferentes temperaturas para cada cosa, al principio para que esté bien balanceada, debes usar una hoja y calibrarla con las ruedas que tiene por debajo en cada esquina hasta sentir una ligera fricción, atención, no apretar de mas para que la boquilla no raspe el trabajo que vayas hacer y asi no tengas problemas más adelante. Si usas otro modelo sacado de internet busca que este centrado, porque intenté con una espátula pequeña pero se imprimía en una esquina y la impresión falló, pensé que era la máquina, así que imprimí con el poco filamento que quedaba solo la base de otro buda y quedó excelente, así que tenía errores el modelo de la espátula. Es una máquina muy rápida, dependiendo si es mas grande en el programa orca slicer, elegoo cura, que son los que use, viene el tiempo que tardará y los gramos que usará del filamento, más sinembargo es un estimado porque al pasar el USB a la impresora maneja otro tiempo pero no es mucha la diferencia, otra cosa que me gustó es que llega antes, me imagino dependiendo la zona, pero lo bueno es que la caja llegó entera sin daños, todos los accesorios vienen dentro, solo que el manual no venia en español, pero uno lo puede conseguir de la pagina principal de Elegoo.

Reviewer: Ulises Soto
Rating: 5.0 out of 5 stars
Title:
Review: Sin duda una impresora fácil de ensamblar y de usar, su calidad es excelente. Quiero ahora la versión plus.

Reviewer: Ruben Perez
Rating: 1.0 out of 5 stars
Title:
Review: Tiene mucho desfase en la impresión, las partes más delicadas las rompe a pesar de ponerle una muy baja velocidad de 60 mm/seg, por eso la devolví, por encender la luz me cancela la impresión, no vale la pena invertir en un producto de pésima calidad, por algo elegoo se enfoca más en impresoras de resina, y ni así es un buen competidor, recomiendo impresoras de Creality o FLSUN

Reviewer: Grace T.
Rating: 5.0 out of 5 stars
Title:
Review: La verdad muy buena impresora, el paquete llegó de Estados Unidos a México sin problemas. La impresora funciona de maravilla. Buena velocidad de impresión. Una excelente compra sin duda.