Price: $108.00
(as of Dec 24, 2024 09:33:13 UTC - Details)

Product Description

The Nikon Z 180-600mm F/5.6-6.3 VR lens cover consists of 8 components.

The outside of the lens cover material is firm and the inside material is soft.It is made of polyester oxford fabric and black short velvet.

The outside material is wear-resistant and scratch-resistant, and the inside material is soft and protective.

The lens cover is installed in most positions, and the switch position is installed by magic tape.

The base protective cover has bottom holes. Does not affect the installation and fixation of the quick release plate.

The lens cover is fully non-slip lined, feels firm and comfortable, and is very suitable for hand-held use.

The fabric splicing uses narrow seam butt jointing technology, showing exquisiteness and beauty from all angles.

When the lens cover installed, the focus ring can be turned independently, the zoom ring rotation damping will not change,and the control switch has a window.

There are 4pcs of L-Fn button on the lens, the Memory Set button, the focus range setting switch, the focus mode change switch, can direct operation.

#9 Grass waterproof color helps disguise lens from wildlife；
Easy to install and remove；
All button remains functional and easy access to camera controls and lens；
The lens protective coat slides on like a sleeve to protects lens from dust, sand, dings, scratches and impact；
Waterproof rubber cover and camouflage patterns help conceal by breaking up the shape of the lens.
Reviewer: Kathy Lebron
Rating: 5.0 out of 5 stars
Title: Don’t Give Up
Review: The sleeves are tight to the lens and take a bit of pulling and prodding to get into place, but once on, they don’t slip or slide at all. I didn’t put the small piece closest to the camera body on because it was giving me some trouble. It’s not needed, and I’m very happy with the product! Looks great and functions well to protect the lens.

Reviewer: Eric Hwang
Rating: 5.0 out of 5 stars
Title: Good fit, works well, looks good
Review: Got my RolanPro skin today. Despite some of the reviews from people who complained that they couldn’t install it, I found that it wasn’t all that difficult. The first two larger pieces were the most difficult. It just took patience and I had a secret weapon: nylon jawed pliers to grab the edges. The nylon jaws avoided scratching the lens and provided a better grip than just my fingers alone.I tried to match this to the covers already on my tripod. Of the five different patterns, I chose the #9 Grass and it’s a fairly close match. This is thinner than LensCoat skins but still protects the lens and I think gives better tactile feel. The edges are nicely finished and most of the pieces have the pattern right up to the edge. Once installed, I don’t foresee it slipping or moving. It doesn’t affect the movements of the zoom or focus rings. My only concern is that I can’t see the alignment marks to level the lens.What isn’t shown is the sleeve into which the foot is inserted. It completely encases the foot with a thin layer of cloth on the bottom that shouldn’t interfere with attaching a lens plate. It probably won’t work with replacement foot/collars such as the iShoot or Kirk.I originally bought a camouflage rain cover, but it was too hard to use the zoom ring and the cover obscured the camera controls. If you were considering this skin for your 180-600mm, I would recommend it. It’s a bit expensive, but should protect your lens from bumps and scratches without being too bulky or in the way.

Reviewer: JB
Rating: 5.0 out of 5 stars
Title: Great Fit and looks great too!
Review: I bought this skin primarily for protecting my expensive lens and am very happy with this product. It takes some patience and a lot of finesse to install the sleeves onto the various locations on the lens but it is worth the effort.

Reviewer: winet
Rating: 5.0 out of 5 stars
Title: So much better than Lenscoat
Review: The coat is a bit of work to get on but it is well worth it. It took me about 30 minutes to install it on my Nikon 180-600 The Lenscoat brand frays on the edges and after a while starts moving around. The RolanPro has a thin rubber coating on the inside so once you get it in position it stays put ! The edges are stitched so you never get any fraying. I have owned these in the past and they are great. I would never buy any other kind

Reviewer: Mark
Rating: 5.0 out of 5 stars
Title: good quality and fit
Review: The lens cover fitted well and is well made.

Reviewer: JD
Rating: 5.0 out of 5 stars
Title: Good product.
Review: Snug fit and no need to continually adjust. Looks great, works great!

Reviewer: Nadia Phaetthanesuan
Rating: 2.0 out of 5 stars
Title: Color bled
Review: The color also bled on first use. I also wish the product has a bit thicker cushion

Reviewer: Mandy
Rating: 5.0 out of 5 stars
Title: Rolanpro for 180-600 lens
Review: Good quality, fits nicely.Fast delivery.Very happy with it.

Reviewer: Phil Stinson
Rating: 5.0 out of 5 stars
Title:
Review: Very well made , fits way better than Lenscoat, but it is hard to put on . I like the double stitching on the edges to prevent fraying… recommend

Reviewer: Chrissy
Rating: 5.0 out of 5 stars
Title:
Review: Excellent

Reviewer: Diego L.
Rating: 5.0 out of 5 stars
Title:
Review: I like everything about it. Good fit, quality and materials.

Reviewer: Gerry Webb
Rating: 5.0 out of 5 stars
Title:
Review: Product is as advertised. Sleeves fit nicely and have sewn seams to minimize or prevent fraying. This is based on initial observations.

Reviewer: Antoine Pelletier
Rating: 5.0 out of 5 stars
Title:
Review: Bon produit