Price: $149.95
(as of Jan 10, 2025 03:48:18 UTC - Details)

Rough Country's 2.5" - 3" Leveling Suspension Kit for Tundra is the most innovative way for you to level the front of your vehicle with the rear, allowing you to dial in the angle you desire. Featuring a set of front, upper strut extensions, this kit can accommodate up to a 33" tire. This kit now includes two sets of 0.25" spacer shims, which can be used in addition to the strut spacers to fine-tune your level angle. Each shim provides roughly 3/8" of lift. Use both for a full 3" level, or fewer to leave a little rake in the front end angle - this is specifically great for individuals who prefer a slight nose down look for an aggressive head-on view, or routinely pull trailers and haul items that would potentially draw the nose up from a full level stance. Designed by Rough Country's in-house Research and Development team, these components are engineered for a precise fit and incorporate superbly with factory equipment. A set of skid plate spacers allow use of the stock skid plate, and all components are easily removable should the vehicle need to be returned to stock height. A set of differential spacers help maintain factory ride quality, promoting optimum angles for the front CV axle after lifting. 100 % bolt-on installation makes setup a breeze, and all components are protected by Rough Country's Lifetime Replacement Warranty.
Give your Tundra the Perfect Blend of Performance, Protection, and Style from Rough Country.
Unmatched Ground Clearance to Conquer On and Off-Road Obstacles | Maintains smooth, OEM like ride
Levels the Front with the Rear | Added 1.5" Rear Lift Blocks.
Differential spacers maintain proper front CV axle angle.
Backed by Rough Country's Limited Lifetime Replacement Warranty.
Reviewer: Amazon Customer
Rating: 5.0 out of 5 stars
Title: Perfect fit
Review: Quality lift components and perfect fit on my 2021

Reviewer: brandon
Rating: 4.0 out of 5 stars
Title: Gets the job done
Review: Installed these at work on our lift we use for our fleet vehicles. Took me about 8-10 hrs. Could have been quicker but it was a learning experience and some stuff took longer than it needed to mostly on my end. Only complaint is it does not come with bracket extensions for the back, had a guy at work make me some out of some scrap machine steel we had. Took about two hrs for the bump stops because of a little rust, pipe wrench and a lot of wtf the toyota.

Reviewer: Cami
Rating: 5.0 out of 5 stars
Title: Great kit!
Review: Made my truck look beautiful and was an easy install at home

Reviewer: Mark in NC
Rating: 5.0 out of 5 stars
Title: Avoid the "Carolina Squat" put the 2.5" up front AND the 1.5" blocks in back
Review: I installed (local shop actually installed) this on my 2018 Toyota Tundra Limited 4x4. Initially, I told them to just put the 2.5" onto the front (no shims) and leave the back alone. After doing the front, they said it was doing the, "Carolina Squat" (truck looked like it was hauling lead in the back). They added the 1.5" blocks in the back and it was level, and looked exactly how I wanted it.You MUST also do a 4-wheel alignment after installation. The original tires are almost done. I'm probably going up one size for the replacements to a 285/60/R20 tire now that the wheel well has been enlarged.See photos after the installation. Very happy.

Reviewer: David McNally
Rating: 3.0 out of 5 stars
Title: Great looking results
Review: Edit (March 9, 2023): originally installed December 2021 and the kit seems to be holding up just fine, no issues had, so I'm adding back a starOnly issue I had on install was there were no brake line bracket extensions included for the rear axle, though they are specifically mentioned and shown in the installation video. Other than that it has the appearances of a well built kit, we'll see how it does after a few months.

Reviewer: Emily McCollum
Rating: 5.0 out of 5 stars
Title: Less than an hour
Review: Easy setup. If you are handy with tools at all should have no problems putting this on.

Reviewer: Takeshikamioka
Rating: 4.0 out of 5 stars
Title: Rc leveling kit
Review: Great product. Instructions could use a little work.

Reviewer: ekgree0252
Rating: 1.0 out of 5 stars
Title: Wrong hardware
Review: Where do I start…Well I purchased this kit back in mid October.Had everything laid out and made sure I had the correct number of bolts/nuts/washers etcThe instructions that come with this kit aren’t the best. But if you have done one before you get the idea.I took my front suspension apart and went to install spacer. The picture is the bolt and nut that are supplied with the kit. This is as far as the nut would screw onto the bolt. So my truck is apart and I can’t install the kit due to not having the correct nuts. Went to my local Lowes to try and find the correct nuts so I could wrap this project up. I took the old nut and bolt with me. Problem was the bolt and nut had a different thread pitch. They didn’t have what I needed in stock. I needed my truck the next day so went home and put it all pack together and contacted RC. They immediately sent me an entirely new kit. Great! Top notch service or so I thought..I waited a few days and the kit came in. Same exact issue… contacted RC again. Told them they must have a bad patch with incorrect hardware and told them exactly what the problem was.They said they would reach out to quality control and let me know. 2 days later I had to reach out and ask if they had heard anything. The only reply was I’m sending you a new bag of hardware. No apology for not getting back to me or anything. So waited a couple days and got a bag of hardware for the front portion of the lift. But to my surprise still a problem with the same nut and bolt combo.So long story short I found some nuts from another company got the leveling kit installed. I have so many left over parts I’m not sure what to do with and I haven’t gotten a response from them after I told them this last bag of hardware was also wrong.So maybe not go with this kit… idk.. seems to ride fine but these rounds of back and forth and no real solution from them has really made me uncertain of this company and it’s “quality”.